Scanalogic

[slinul]

Software for pc useless damage archive

[ikalogic]

Here is file again.

Sorry guys a part of our database was damaged and there was some minor parts that couldn't be restored..

[sadmonew]

Here is file again.

Sorry guys a part of our database was damaged and there was some minor parts that couldn't be restored..

Thank you. The Scanlogic software work on PC without problem.
very nice.

[petros]

Hello .

Can you post again the visual basic source program because is corrupted.

Thank you

[jancz]

Hi,
after start of Scanalogic, program shoved message" Run Time error 13" Type mismatch. Next time the program cannot be setting, configurated etc.
Can You wite me, where is a mistake2687

[aaamirnad]

I need the pc software for this project

Aamirnad@hotmail.com

[dejan_kaljevic]

Code: Select all

[quote][/quote]

pcx sowtwear

[byteman]

I need monitoring slow signals. please upload hex file for 500KHz or 2MHz resonator.
Best regards.

[Dawn]

Tried to download zip file but the file is a registry mechanic program.

UPDATE: I was getting a Run time error 5. I have a PC with Windows 7 and have fixed the problem.

FIX

Steps.

1. Copy regsvr32.exc and paste in scanalogic folder.
2. In all programs-open accessories-right click on command prompt and run as administrator.
3. Open command prompt and change directory location to location of your scanalogic folder.
4. register the ocx files.
5. open scanalogic and it should work.

Had to download an ocx file. Have attached folder with the included file.

[osgeld]

Is a repost of the VB source in the future, I would love to use this but no windows machine at the bench

Thanks!

[suhlig]

I'am looking for a up to date hex file for atmega32. I found one, but the trigger do not working. If i set a trigger the application hangs. I think the hex is too old!2687 Can anybody help2687 THX

[user210]

registered all the ocx but when I run the program generates an error

Code: Select all

---------------------------
Scanalogic
---------------------------
Run-time error '13 ':

Type mismatch
---------------------------
OK
---------------------------

[pranavsharma2504]

Hello Ibrahim. seems like the download link is broken again. I wonder why it keeps happening.
I was recently working on a project dealing with IR, and scanalogic always serves as the best tool I was even discussing about you here - http://extremeelectronics.co.in/tools/visualize-adc-data-on-pc-screen-using-usart-avr-project/comment-page-1/

[Nkaati]

Can you fix the download link; the zip file seems to be corrupted.

[Alabo]

Hello, I tested the Scanalogic with Atmega8 at 8 MHz (scanalogic_8MHz.hex) .
I tested the lines of a working SPI-bus, the TxD line of a UART and an 10kHz rectange
from a function-generator.
At first in the PC-Software were written some text lines, ending all with OK or Done.
The last line was: downloading samples and many bars.
But that was all. No samples were to be seen.
The LED was on. On the RxD/TxD-lines were some transmissions for a short time.
And then nothing more. What could be the failure?

Thanks for help