SP1000G Series Specifications
Download the datasheet.
Timing and Measurement Specifications​
| Specification | SP1018G | SP1036G | SP1054G |
|---|---|---|---|
| Sampling Rate (MAX) | 1000 MHz | 1000 MHz | 1000 MHz |
| Pattern generator resolution (fixed) | 8 ns | 8ns | 8ns |
| External Clock Frequency (MAX) | 250 MHz | 250 MHz | 250 MHz |
| Embedded Memory | 4 Gb | 8 Gb | 12 Gb |
| External Clock Timebase (Typical)¹ | 10 MHz (max 25 ppm) | 10 MHz (max 25 ppm) | 10 MHz (max 25 ppm) |
| External Timebase Input | Yes | Yes | Yes |
| Capture Streaming to Computer | Yes | Yes | Yes |
| Generator Streaming from Computer | Yes | Yes | Yes |
| Configurable Pre-Trigger Time | Yes | Yes | Yes |
| Trigger Output | Yes | Yes | Yes |
| External Trigger Input | Yes | Yes | Yes |
| Logic Signals Digital Bandwidth² | 250 MHz | 250 MHz | 250 MHz |
¹ External timebase is tested up to 25 ppm stability. System operation is not guaranteed beyond this limit.
² Measured with the supplied 9-channel probe wire harness.
Active Probes Set Specifications (Input Mode)​
| Parameter | Value |
|---|---|
| Number of Channels per Probe Set | 9 |
| Input Impedance (Input Mode) | 10 kΩ – 5 pF |
| Threshold Circuits | 1 |
| Adjustable Capture Threshold | 0 V to 3.0 V (1 mV steps) |
| Adjustable Generator Voltage | 0 V to 5.0 V (1 mV steps) |
| Compatible Logic Levels | 0.9 V, 1.0 V, 1.2 V, 1.5 V, 1.8 V, 2.5 V, 3.3 V, 5.0 V |
| Absolute Max Voltage on Inputs | ±10 V (continuous or transient) |
What's in the Box​
SP1018G​
- SP1000G host device
- 2 active probes (9 channels each)
- 2 × 9-channel probe harnesses
- 12 V 3 A power supply
- USB 3.0 cable (A to B, 1.5 m)
SP1036G​
- SP1000G host device
- 4 active probes (9 channels each)
- 4 × 9-channel probe harnesses
- 12 V 6 A power supply
- USB 3.0 cable (A to B, 1.5 m)
SP1054G​
- SP1000G host device
- 6 active probes (9 channels each)
- 6 × 9-channel probe harnesses
- 12 V 6 A power supply
- USB 3.0 cable (A to B, 1.5 m)