Discontinued products
The purpose of this page is to provide minimal support information for obsolete products.
If you need any further information, you can always contact us with your questions.
Scanalogic-2 PRO and ScanaLogic-2 EDU KIT
Replacement product: ScanaQuad
Basic information
20 MSPS (Million samples per second).
Memory: 256 K samples per channel (1M samples total).
Number of channels: 4.
Possible configurations: 4 inputs, 4 outputs, 2 inputs and 2 outputs.
Trigger options
Pre-Trigger data display: 0% to 100% (allows to focus on post or pre-trigger data).
Trigger modes: Rising edge, Falling edge, Logic change on a specific channel, logic change on any channel.
Input and output characteristics
Supported input logic levels: 2V, 2.8V, 3V, 3.3V, 3.6V and 5V.
Allowed input voltage range: -0.7V to 5.5V.
Output voltage levels: 3.6V.
Supporting software: ScanaStudio V2.3
EDU-KIT Assembly guide
ScanaPLUS and ScanaPLUS V2
Basic information
- Maximum sampling rate 100 MHz
- Timing accuracy ± 10 ns (In all modes)
- Channels 9
- Differential inputs 4 (Channel 5 to 8 form 2 differential pairs)
- Input bandwidth (Max.) 25 MHz (1 channel) | 16MHz (4 channels) | 10 MHz (All 9 channels)
- Supported logic levels 1.2V | 1.8V | 3.3V | 5V | 12V | ±12V (RS232) | Differential (CAN/RS485)
- Trigger options Rising edge | Falling edge | Logic level | Pulse width | Serial sequence
- Input voltage range ± 24V (continuous) | ±50V (10s pulse width)
- Input impedance 100KΩ
- Input capacitance 10pF Maximum
- Weight & Dimensions: Weight: 59 gm (2.08 oz) | 73 x 46 x 17 mm (2.87 x 1.81 x 0.67 inches)
Supporting software: ScanaStudio V2.3
ScanaPlus is also supported by latest ScanaStudio V3.